Do you want to learn how you can Change Flat Tire? We all wish we won’t, but even the most careful drivers can’t completely rule out the potential of suffering a flat tire. Therefore, having the capacity to repair your tires is essential.
You may lower your chance of getting a flat tire by taking proper care of your tires and maintaining them filled to the right pressure. However, even then, a tire might be punctured or blown out by a sharp item or a big nail on the side of the road.
Fortunately, changing a flat tire on your own is not as hard as you may imagine. In reality, if you possess the right equipment, you can go back to business as usual in just 30 minutes.
Have You Noticed an Odd Smell in Your Car? Let’s Find Out!
Prepare Yourself with Mandatory Equipment
Be sure you park in a secure area away from the traffic. Switch off your engine, engage your handbrake, and switch on your danger lights. Put on protective gear and look in your car’s handbook for any extra guidance.
Get everything ready now, place the warning triangle where it belongs, and place the wheel chocks in front or behind the filled tires, depending on your preference.
Take The Wheel Nuts Off to Change Flat Tire
You should gently loosen the wheel nuts while the flat tire is secured to the ground before using the jack to lift your automobile. If your car has locking wheel nuts, you should start utilizing the locking key.
Then, with your wrench, rotate the nuts counterclockwise to release them. After a little bit of loosening, stop and prepare to lift your automobile with the jack.
Using the Jack, Raise Your Car
Before you begin, consult your vehicle’s handbook since it will explain how to position your jack so as to protect the automobile. When aligning your jack with the jacking point and performing the jacking process, make sure it is flat and solid.
If at any moment it seems unsteady, lower the pressure and begin again. Gently wind the jack after you have enough room to rapidly replace the flat tire.
Use Spare Tire to Change Flat Tire
Now that you’ve already loosened the wheel nuts a little, it should be straightforward to finish. When you store the wheel nuts in a safe location, like a pocket or inside the car, keep in mind which way about they must go until you are ready to reconnect the wheel nuts.
Now take off and discard the flat tire. Change the flat tire after mounting your spare tire and tightening the wheel nuts.
After Lowering Your Car, Complete Tightening Wheel Nuts
Bring your automobile back to the ground slowly. Now, using your wrench once again, tighten the nuts as much as possible. After accomplishing this, you may store all of your equipment.
Check Wheel Nuts Again
It’s a decent knowledge to double-check your wheel ‘s nuts are as snug as possible and aren’t loosening up owing to highway vibrations after a few miles of traveling on the spare tire.
